FKIE_CVE-2026-31494
Vulnerability from fkie_nvd - Published: 2026-04-22 14:16 - Updated: 2026-10-15 02:19
Severity
Summary
In the Linux kernel, the following vulnerability has been resolved:
net: macb: use the current queue number for stats
There's a potential mismatch between the memory reserved for statistics
and the amount of memory written.
gem_get_sset_count() correctly computes the number of stats based on the
active queues, whereas gem_get_ethtool_stats() indiscriminately copies
data using the maximum number of queues, and in the case the number of
active queues is less than MACB_MAX_QUEUES, this results in a OOB write
as observed in the KASAN splat.
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78
[macb]
Write of size 760 at addr ffff80008080b000 by task ethtool/1027
CPU: [...]
Tainted: [E]=UNSIGNED_MODULE
Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
print_report+0x384/0x5e0
kasan_report+0xa0/0xf0
kasan_check_range+0xe8/0x190
__asan_memcpy+0x54/0x98
gem_get_ethtool_stats+0x54/0x78 [macb
926c13f3af83b0c6fe64badb21ec87d5e93fcf65]
dev_ethtool+0x1220/0x38c0
dev_ioctl+0x4ac/0xca8
sock_do_ioctl+0x170/0x1d8
sock_ioctl+0x484/0x5d8
__arm64_sys_ioctl+0x12c/0x1b8
invoke_syscall+0xd4/0x258
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
The buggy address belongs to a 1-page vmalloc region starting at
0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff00000a333000 pfn:0xa333
flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)
raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
Fix it by making sure the copied size only considers the active number of
queues.
References
Impacted products
| Vendor | Product | Version | |
|---|---|---|---|
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | * | |
| linux | linux_kernel | 4.16 | |
| linux | linux_kernel | 7.0 | |
| linux | linux_kernel | 7.0 | |
| linux | linux_kernel | 7.0 | |
| linux | linux_kernel | 7.0 | |
| linux | linux_kernel | 7.0 | |
| linux | linux_kernel | 7.0 | |
| linux | linux_kernel | 7.0 |
{
"affected": [
{
"affectedData": [
{
"defaultStatus": "unaffected",
"product": "Linux",
"programFiles": [
"drivers/net/ethernet/cadence/macb_main.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"lessThan": "9738be665544281aa624842812c2fbfed6f88226",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
},
{
"lessThan": "240c5302eed83e34e98db18f6795ee5f40814024",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
},
{
"lessThan": "9596759a84e1dbf2670518d85e969208960041f9",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
},
{
"lessThan": "95246341945163ad9a250a87ca5bd1c1252777ae",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
},
{
"lessThan": "9d74d10e4e26672e139a8bcf8bf95957bf2d160f",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
},
{
"lessThan": "7ff87da099210856cbfe2f2f7f52ddfa57af4f0c",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
},
{
"lessThan": "e182fe273cdf5a8931592228196ef514ffac392b",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
},
{
"lessThan": "72d96e4e24bbefdcfbc68bdb9341a05d8f5cb6e5",
"status": "affected",
"version": "512286bbd4b7d5b15d26ba8078c8bfd1fc1129bd",
"versionType": "git"
}
]
},
{
"defaultStatus": "affected",
"product": "Linux",
"programFiles": [
"drivers/net/ethernet/cadence/macb_main.c"
],
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"vendor": "Linux",
"versions": [
{
"status": "affected",
"version": "4.16"
},
{
"lessThan": "4.16",
"status": "unaffected",
"version": "0",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.10.*",
"status": "unaffected",
"version": "5.10.253",
"versionType": "semver"
},
{
"lessThanOrEqual": "5.15.*",
"status": "unaffected",
"version": "5.15.203",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.1.*",
"status": "unaffected",
"version": "6.1.168",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.6.*",
"status": "unaffected",
"version": "6.6.131",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.12.*",
"status": "unaffected",
"version": "6.12.80",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.18.*",
"status": "unaffected",
"version": "6.18.21",
"versionType": "semver"
},
{
"lessThanOrEqual": "6.19.*",
"status": "unaffected",
"version": "6.19.11",
"versionType": "semver"
},
{
"lessThanOrEqual": "*",
"status": "unaffected",
"version": "7.0",
"versionType": "original_commit_for_fix"
}
]
}
],
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67"
},
{
"affectedData": [
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIMATIC S7-1500 CPU 1518F-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.6",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.5",
"versionType": "custom"
}
]
},
{
"defaultStatus": "unknown",
"product": "SIPLUS S7-1500 CPU 1518-4 PN/DP MFP",
"vendor": "Siemens",
"versions": [
{
"lessThan": "*",
"status": "affected",
"version": "V3.1.7",
"versionType": "custom"
}
]
}
],
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e"
}
],
"configurations": [
{
"nodes": [
{
"cpeMatch": [
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "96C0EA12-83B8-4804-94AB-EF34257BCBDF",
"versionEndExcluding": "5.10.253",
"versionStartIncluding": "4.16.1",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "20DDB3E9-AABF-4107-ADB0-5362AA067045",
"versionEndExcluding": "5.15.203",
"versionStartIncluding": "5.11",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "E2DDDCA1-6DAB-4018-B920-8F045DDD8D3B",
"versionEndExcluding": "6.1.168",
"versionStartIncluding": "5.16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "CE6ED4D4-0046-4573-BFA9-D64143B6A89F",
"versionEndExcluding": "6.6.131",
"versionStartIncluding": "6.2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "97EB19EC-A11E-49C6-9D2F-6F6EC6CB98B6",
"versionEndExcluding": "6.12.80",
"versionStartIncluding": "6.7",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "ED39847A-3B46-4729-B7CA-B2C30B9FA8FE",
"versionEndExcluding": "6.18.21",
"versionStartIncluding": "6.13",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
"matchCriteriaId": "4CA2E747-A9EC-4518-9AA2-B4247FC748B7",
"versionEndExcluding": "6.19.11",
"versionStartIncluding": "6.19",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:4.16:-:*:*:*:*:*:*",
"matchCriteriaId": "F60469AF-0A23-41D3-BC6A-C0D9A45A2CBC",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc1:*:*:*:*:*:*",
"matchCriteriaId": "F253B622-8837-4245-BCE5-A7BF8FC76A16",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc2:*:*:*:*:*:*",
"matchCriteriaId": "4AE85AD8-4641-4E7C-A2F4-305E2CD9EE64",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc3:*:*:*:*:*:*",
"matchCriteriaId": "F666C8D8-6538-46D4-B318-87610DE64C34",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc4:*:*:*:*:*:*",
"matchCriteriaId": "02259FDA-961B-47BC-AE7F-93D7EC6E90C2",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc5:*:*:*:*:*:*",
"matchCriteriaId": "58A9FEFF-C040-420D-8F0A-BFDAAA1DF258",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc6:*:*:*:*:*:*",
"matchCriteriaId": "1D2315C0-D46F-4F85-9754-F9E5E11374A6",
"vulnerable": true
},
{
"criteria": "cpe:2.3:o:linux:linux_kernel:7.0:rc7:*:*:*:*:*:*",
"matchCriteriaId": "512EE3A8-A590-4501-9A94-5D4B268D6138",
"vulnerable": true
}
],
"negate": false,
"operator": "OR"
}
]
}
],
"cveTags": [],
"descriptions": [
{
"lang": "en",
"value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: macb: use the current queue number for stats\n\nThere\u0027s a potential mismatch between the memory reserved for statistics\nand the amount of memory written.\n\ngem_get_sset_count() correctly computes the number of stats based on the\nactive queues, whereas gem_get_ethtool_stats() indiscriminately copies\ndata using the maximum number of queues, and in the case the number of\nactive queues is less than MACB_MAX_QUEUES, this results in a OOB write\nas observed in the KASAN splat.\n\n==================================================================\nBUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78\n [macb]\nWrite of size 760 at addr ffff80008080b000 by task ethtool/1027\n\nCPU: [...]\nTainted: [E]=UNSIGNED_MODULE\nHardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025\nCall trace:\n show_stack+0x20/0x38 (C)\n dump_stack_lvl+0x80/0xf8\n print_report+0x384/0x5e0\n kasan_report+0xa0/0xf0\n kasan_check_range+0xe8/0x190\n __asan_memcpy+0x54/0x98\n gem_get_ethtool_stats+0x54/0x78 [macb\n 926c13f3af83b0c6fe64badb21ec87d5e93fcf65]\n dev_ethtool+0x1220/0x38c0\n dev_ioctl+0x4ac/0xca8\n sock_do_ioctl+0x170/0x1d8\n sock_ioctl+0x484/0x5d8\n __arm64_sys_ioctl+0x12c/0x1b8\n invoke_syscall+0xd4/0x258\n el0_svc_common.constprop.0+0xb4/0x240\n do_el0_svc+0x48/0x68\n el0_svc+0x40/0xf8\n el0t_64_sync_handler+0xa0/0xe8\n el0t_64_sync+0x1b0/0x1b8\n\nThe buggy address belongs to a 1-page vmalloc region starting at\n 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0\nThe buggy address belongs to the physical page:\npage: refcount:1 mapcount:0 mapping:0000000000000000\n index:0xffff00000a333000 pfn:0xa333\nflags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)\nraw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000\nraw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000\npage dumped because: kasan: bad access detected\n\nMemory state around the buggy address:\n ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n\u003effff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8\n ^\n ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8\n ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8\n==================================================================\n\nFix it by making sure the copied size only considers the active number of\nqueues."
}
],
"id": "CVE-2026-31494",
"lastModified": "2026-10-15T02:19:08.160",
"metrics": {
"cvssMetricV31": [
{
"cvssData": {
"attackComplexity": "LOW",
"attackVector": "LOCAL",
"availabilityImpact": "HIGH",
"baseScore": 7.8,
"baseSeverity": "HIGH",
"confidentialityImpact": "HIGH",
"integrityImpact": "HIGH",
"privilegesRequired": "LOW",
"scope": "UNCHANGED",
"userInteraction": "NONE",
"vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H",
"version": "3.1"
},
"exploitabilityScore": 1.8,
"impactScore": 5.9,
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"type": "Secondary"
}
]
},
"published": "2026-04-22T14:16:47.293",
"references": [
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/240c5302eed83e34e98db18f6795ee5f40814024"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/72d96e4e24bbefdcfbc68bdb9341a05d8f5cb6e5"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/7ff87da099210856cbfe2f2f7f52ddfa57af4f0c"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/95246341945163ad9a250a87ca5bd1c1252777ae"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/9596759a84e1dbf2670518d85e969208960041f9"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/9738be665544281aa624842812c2fbfed6f88226"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/9d74d10e4e26672e139a8bcf8bf95957bf2d160f"
},
{
"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"tags": [
"Patch"
],
"url": "https://git.kernel.org/stable/c/e182fe273cdf5a8931592228196ef514ffac392b"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-019113.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-082556.html"
},
{
"source": "0b142b55-0307-4c5a-b3c9-f314f3fb7c5e",
"url": "https://cert-portal.siemens.com/productcert/html/ssa-457936.html"
}
],
"sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
"vulnStatus": "Modified",
"weaknesses": [
{
"description": [
{
"lang": "en",
"value": "CWE-787"
}
],
"source": "nvd@nist.gov",
"type": "Primary"
}
]
}
Loading…
Loading…
Drag nodes to arrange them. Double-click a related vulnerability to open it, or a source to visit its link. The Physics button on the left tunes the layout and the simulation; the legend at the bottom left hides or shows nodes by kind and by sighting type.
Experimental. This forecast is provided for visualization only and may change without notice. Do not use it for operational decisions.
Forecast uses a logistic model when the trend is rising, or an exponential decay model when the trend is falling. Fitted via linearized least squares.
Sightings
| Author | Source | Type | Date | Other |
|---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or observed by the user.
- Confirmed: The vulnerability has been validated from an analyst's perspective.
- Published Proof of Concept: A public proof of concept is available for this vulnerability.
- Exploited: The vulnerability was observed as exploited by the user who reported the sighting.
- Patched: The vulnerability was observed as successfully patched by the user who reported the sighting.
- Not exploited: The vulnerability was not observed as exploited by the user who reported the sighting.
- Not confirmed: The user expressed doubt about the validity of the vulnerability.
- Not patched: The vulnerability was not observed as successfully patched by the user who reported the sighting.
Vulnerability timeline
Sightings and recorded dates, grouped by day · UTC
Loading timeline…
Loading…
Loading…
The MITRE ATT&CK techniques below are AI-generated suggestions, inferred from the description of the
vulnerability by the CIRCL/vulnerability-attack-technique-classification-roberta-base
model, served locally by ML-Gateway.
They have not been verified by an analyst and are provided for guidance only.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
The approach is described in our paper Mapping CVEs to MITRE ATT&CK Techniques: A Curated Gold-Set Classifier and the Limits of LLM-Assisted Label Expansion.
Browse all ATT&CK techniques and the vulnerabilities related to each.
Loading…
Related by attack behaviour
Vulnerabilities whose description is nearest to this one in the vector space of the CIRCL/vulnerability-attack-technique-biencoder model. This is a similarity search over the bi-encoder space (plain cosine), not a classification, and it has no measured accuracy.