Search criteria

2 vulnerabilities found for SE Firmware by silabs.com

CVE-2024-2502 (GCVE-0-2024-2502)

Vulnerability from nvd – Published: 2024-08-29 22:06 – Updated: 2024-08-30 14:54
VLAI?
Title
Failure to update the tamper reset cause register when a tamper event occurs
Summary
An application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected. This is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later.
Severity ?
2 (Low)
CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N
CWE
  • CWE-754 - Improper Check for Unusual or Exceptional Conditions
Assigner
References
https://community.silabs.com/sfc/servlet.shepherd… vendor-advisorypermissions-required
Impacted products
Vendor Product Version
silabs.com SE Firmware Affected: 0 , ≤ 2.2.5 (semver)
Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2024-2502",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2024-08-30T14:53:47.923088Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2024-08-30T14:54:03.128Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "packageName": "SiSDK/GSDK",
          "product": "SE Firmware",
          "repo": "https://github.com/SiliconLabs/simplicity_sdk",
          "vendor": "silabs.com",
          "versions": [
            {
              "lessThanOrEqual": "2.2.5",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003eAn application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected.\u003c/span\u003e\n\nThis is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later.\u0026nbsp;"
            }
          ],
          "value": "An application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected.\n\nThis is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later."
        }
      ],
      "impacts": [
        {
          "capecId": "CAPEC-440",
          "descriptions": [
            {
              "lang": "en",
              "value": "CAPEC-440 Hardware Integrity Attack"
            }
          ]
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "HIGH",
            "attackVector": "PHYSICAL",
            "availabilityImpact": "NONE",
            "baseScore": 2,
            "baseSeverity": "LOW",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-754",
              "description": "CWE-754 Improper Check for Unusual or Exceptional Conditions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2024-08-29T22:06:59.299Z",
        "orgId": "030b2754-1501-44a4-bef8-48be86a33bf4",
        "shortName": "Silabs"
      },
      "references": [
        {
          "tags": [
            "vendor-advisory",
            "permissions-required"
          ],
          "url": "https://community.silabs.com/sfc/servlet.shepherd/document/download/069Vm00000BYb5HIAT?operationContext=S1"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "Failure to update the tamper reset cause register when a tamper event occurs",
      "x_generator": {
        "engine": "Vulnogram 0.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "030b2754-1501-44a4-bef8-48be86a33bf4",
    "assignerShortName": "Silabs",
    "cveId": "CVE-2024-2502",
    "datePublished": "2024-08-29T22:06:59.299Z",
    "dateReserved": "2024-03-15T13:34:41.105Z",
    "dateUpdated": "2024-08-30T14:54:03.128Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}

CVE-2024-2502 (GCVE-0-2024-2502)

Vulnerability from cvelistv5 – Published: 2024-08-29 22:06 – Updated: 2024-08-30 14:54
VLAI?
Title
Failure to update the tamper reset cause register when a tamper event occurs
Summary
An application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected. This is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later.
Severity ?
2 (Low)
CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N
CWE
  • CWE-754 - Improper Check for Unusual or Exceptional Conditions
Assigner
References
https://community.silabs.com/sfc/servlet.shepherd… vendor-advisorypermissions-required
Impacted products
Vendor Product Version
silabs.com SE Firmware Affected: 0 , ≤ 2.2.5 (semver)
Create a notification for this product.
Show details on NVD website
To clipboard 

{
  "containers": {
    "adp": [
      {
        "metrics": [
          {
            "other": {
              "content": {
                "id": "CVE-2024-2502",
                "options": [
                  {
                    "Exploitation": "none"
                  },
                  {
                    "Automatable": "no"
                  },
                  {
                    "Technical Impact": "partial"
                  }
                ],
                "role": "CISA Coordinator",
                "timestamp": "2024-08-30T14:53:47.923088Z",
                "version": "2.0.3"
              },
              "type": "ssvc"
            }
          }
        ],
        "providerMetadata": {
          "dateUpdated": "2024-08-30T14:54:03.128Z",
          "orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0",
          "shortName": "CISA-ADP"
        },
        "title": "CISA ADP Vulnrichment"
      }
    ],
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "packageName": "SiSDK/GSDK",
          "product": "SE Firmware",
          "repo": "https://github.com/SiliconLabs/simplicity_sdk",
          "vendor": "silabs.com",
          "versions": [
            {
              "lessThanOrEqual": "2.2.5",
              "status": "affected",
              "version": "0",
              "versionType": "semver"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "supportingMedia": [
            {
              "base64": false,
              "type": "text/html",
              "value": "\u003cspan style=\"background-color: rgb(255, 255, 255);\"\u003eAn application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected.\u003c/span\u003e\n\nThis is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later.\u0026nbsp;"
            }
          ],
          "value": "An application can be configured to block boot attempts after consecutive tamper resets are detected, which may not occur as expected.\n\nThis is possible because the TAMPERRSTCAUSE register may not be properly updated when a level 4 tamper event (a tamper reset) occurs. This impacts Series 2 HSE-SVH devices, including xG23B, xG24B, xG25B, and xG28B, but does not impact xG21B. To mitigate this issue, upgrade to SE Firmware version 2.2.6 or later."
        }
      ],
      "impacts": [
        {
          "capecId": "CAPEC-440",
          "descriptions": [
            {
              "lang": "en",
              "value": "CAPEC-440 Hardware Integrity Attack"
            }
          ]
        }
      ],
      "metrics": [
        {
          "cvssV3_1": {
            "attackComplexity": "HIGH",
            "attackVector": "PHYSICAL",
            "availabilityImpact": "NONE",
            "baseScore": 2,
            "baseSeverity": "LOW",
            "confidentialityImpact": "NONE",
            "integrityImpact": "LOW",
            "privilegesRequired": "NONE",
            "scope": "UNCHANGED",
            "userInteraction": "NONE",
            "vectorString": "CVSS:3.1/AV:P/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N",
            "version": "3.1"
          },
          "format": "CVSS",
          "scenarios": [
            {
              "lang": "en",
              "value": "GENERAL"
            }
          ]
        }
      ],
      "problemTypes": [
        {
          "descriptions": [
            {
              "cweId": "CWE-754",
              "description": "CWE-754 Improper Check for Unusual or Exceptional Conditions",
              "lang": "en",
              "type": "CWE"
            }
          ]
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2024-08-29T22:06:59.299Z",
        "orgId": "030b2754-1501-44a4-bef8-48be86a33bf4",
        "shortName": "Silabs"
      },
      "references": [
        {
          "tags": [
            "vendor-advisory",
            "permissions-required"
          ],
          "url": "https://community.silabs.com/sfc/servlet.shepherd/document/download/069Vm00000BYb5HIAT?operationContext=S1"
        }
      ],
      "source": {
        "discovery": "UNKNOWN"
      },
      "title": "Failure to update the tamper reset cause register when a tamper event occurs",
      "x_generator": {
        "engine": "Vulnogram 0.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "030b2754-1501-44a4-bef8-48be86a33bf4",
    "assignerShortName": "Silabs",
    "cveId": "CVE-2024-2502",
    "datePublished": "2024-08-29T22:06:59.299Z",
    "dateReserved": "2024-03-15T13:34:41.105Z",
    "dateUpdated": "2024-08-30T14:54:03.128Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1"
}