Common Weakness Enumeration

CWE-400

Weakness Discouraged

Uncontrolled Resource Consumption

Abstraction: Class · Status: Draft

The product does not properly control the allocation and maintenance of a limited resource.

Dimensions

  • Behavior-Property: Uncontrolled
  • Behavior-Type: Consumption
  • Resource-Type: Resource
Mapping guidance

CWE-400 is intended for incorrect behaviors in which the product is expected to track and restrict how many resources it consumes, but CWE-400 is often misused because it is conflated with the "technical impact" of vulnerabilities in which resource consumption occurs. It is sometimes used for low-information vulnerability reports. It is a level-1 Class (i.e., a child of a Pillar).

Closely analyze the specific mistake that is causing resource consumption, and perform a CWE mapping for that mistake. Consider children/descendants.

Relationships and members
ChildOf: CWE-664 · View CWE-1000
Modes of introduction
Operation

The product could be operated in a system or environment with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

System Configuration

The product could be configured with lower resource limits than expected, which might make it easier for attackers to consume all available resources.

Architecture and Design

The designer might not consider how to handle and throttle excessive resource requests, which typically requires careful planning to handle more gracefully than a crash or exit.

Implementation

There are at least three distinct scenarios that can commonly lead to resource exhaustion:

Lack of throttling for the number of allocated resources.

Losing all references to a resource before reaching the shutdown stage.

Not closing/returning a resource after processing.

Resource exhaustion problems often occur due to an incorrect implementation of the following situations:

Error conditions and other exceptional circumstances.

Confusion over which part of the program is responsible for releasing the resource.

Detection methods

Automated Static Analysis

Automated static analysis typically has limited utility in recognizing resource exhaustion problems, except for program-independent system resources such as files, sockets, and processes. For system resources, automated static analysis may be able to detect circumstances in which resources are not released after they have expired. Automated analysis of configuration files may be able to detect settings that do not specify a maximum value.

Automated static analysis tools will not be appropriate for detecting exhaustion of custom resources, such as an intended security policy in which a bulletin board user is only allowed to make a limited number of posts per day.

Effectiveness: Limited

Automated Dynamic Analysis

Certain automated dynamic analysis techniques may be effective in spotting resource exhaustion problems, especially with resources such as processes, memory, and connections. The technique may involve generating a large number of requests to the product within a short time frame.

Effectiveness: Moderate

Fuzzing

While fuzzing is typically geared toward finding low-level implementation bugs, it can inadvertently find resource exhaustion problems. This can occur when the fuzzer generates a large number of test cases but does not restart the targeted product in between test cases. If an individual test case produces a crash, but it does not do so reliably, then an inability to handle resource exhaustion may be the cause.

Effectiveness: Opportunistic

Notes

Theoretical

Vulnerability theory is largely about how behaviors and resources interact. "Resource exhaustion" can be regarded as either a consequence or an attack, depending on the perspective. This entry is an attempt to reflect the underlying weaknesses that enable these attacks (or consequences) to take place.

Other

Database queries that take a long time to process are good DoS targets. An attacker would have to write a few lines of code to generate enough traffic to exceed the site's ability to keep up. This would effectively prevent authorized users from using the site at all. Resources can be exploited simply by ensuring that the target machine must do much more work and consume more resources in order to service a request than the attacker must do to initiate a request.

A prime example of this can be found in old switches that were vulnerable to "macof" attacks (so named for a tool developed by Dugsong). These attacks flooded a switch with random IP and MAC address combinations, therefore exhausting the switch's cache, which held the information of which port corresponded to which MAC addresses. Once this cache was exhausted, the switch would fail in an insecure way and would begin to act simply as a hub, broadcasting all traffic on all ports and allowing for basic sniffing attacks.

Limited resources include memory, file system storage, database connection pool entries, CPU, and others.

Content history
Submission: CLASP · 2006-07-19 · CWE Draft 3
Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-01-24 · CWE 4.10

Suggested mappings to ISA/IEC 62443.

Contribution: "Mapping CWE to 62443" Sub-Working Group · CWE-CAPEC ICS/OT SIG · 2023-04-25 · CWE 4.11

Suggested mappings to ISA/IEC 62443.

Contribution: Abhi Balakrishnan · 2025-02-25 · CWE 4.17

Provided diagram to improve CWE usability.

Modification: Eric Dalci · Cigital · 2008-07-01 · CWE 1.0

updated Time_of_Introduction

Modification: · Veracode · 2008-08-15 · CWE 1.0

Suggested OWASP Top Ten 2004 mapping

Modification: CWE Content Team · MITRE · 2008-09-08 · CWE 1.0

updated Common_Consequences, Relationships, Other_Notes, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2008-10-14 · CWE 1.0.1

updated Description, Name, Relationships

Modification: CWE Content Team · MITRE · 2009-01-12 · CWE 1.2

updated Description

Modification: CWE Content Team · MITRE · 2009-05-27 · CWE 1.4

updated Name, Relationships

Modification: CWE Content Team · MITRE · 2009-07-27 · CWE 1.5

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2009-10-29 · CWE 1.6

updated Relationships

Modification: CWE Content Team · MITRE · 2009-12-28 · CWE 1.7

updated Common_Consequences, Demonstrative_Examples, Detection_Factors, Likelihood_of_Exploit, Observed_Examples, Other_Notes, Potential_Mitigations, References

Modification: CWE Content Team · MITRE · 2010-02-16 · CWE 1.8

updated Detection_Factors, Potential_Mitigations, References, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2010-04-05 · CWE 1.8.1

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2010-06-21 · CWE 1.9

updated Description

Modification: CWE Content Team · MITRE · 2010-09-27 · CWE 1.10

updated Demonstrative_Examples

Modification: CWE Content Team · MITRE · 2011-06-01 · CWE 1.13

updated Common_Consequences, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2012-05-11 · CWE 2.2

updated Demonstrative_Examples, Related_Attack_Patterns, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2013-07-17 · CWE 2.5

updated Relationships

Modification: CWE Content Team · MITRE · 2014-07-30 · CWE 2.8

updated Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2015-12-07 · CWE 2.9

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2017-01-19 · CWE 2.10

updated Relationships

Modification: CWE Content Team · MITRE · 2017-11-08 · CWE 3.0

updated Applicable_Platforms, Demonstrative_Examples, Likelihood_of_Exploit, Potential_Mitigations, References, Relationships

Modification: CWE Content Team · MITRE · 2018-03-27 · CWE 3.1

updated References, Type

Modification: CWE Content Team · MITRE · 2019-01-03 · CWE 3.2

updated Alternate_Terms, Description, Name, Relationships, Taxonomy_Mappings, Theoretical_Notes

Modification: CWE Content Team · MITRE · 2019-06-20 · CWE 3.3

updated Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2019-09-19 · CWE 3.4

updated Description, Relationships

Modification: CWE Content Team · MITRE · 2020-02-24 · CWE 4.0

updated Description, References, Related_Attack_Patterns, Relationships

Modification: CWE Content Team · MITRE · 2020-06-25 · CWE 4.1

updated Description, Maintenance_Notes

Modification: CWE Content Team · MITRE · 2020-08-20 · CWE 4.2

updated Relationships

Modification: CWE Content Team · MITRE · 2022-04-28 · CWE 4.7

updated Related_Attack_Patterns

Modification: CWE Content Team · MITRE · 2022-06-28 · CWE 4.8

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2022-10-13 · CWE 4.9

updated Observed_Examples, Relationships

Modification: CWE Content Team · MITRE · 2023-01-31 · CWE 4.10

updated Common_Consequences, Description, Detection_Factors, Maintenance_Notes, Related_Attack_Patterns, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-04-27 · CWE 4.11

updated Demonstrative_Examples, Relationships, Taxonomy_Mappings

Modification: CWE Content Team · MITRE · 2023-06-29 · CWE 4.12

updated Mapping_Notes, Relationships

Modification: CWE Content Team · MITRE · 2024-11-19 · CWE 4.16

updated Relationships

Modification: CWE Content Team · MITRE · 2025-04-03 · CWE 4.17

updated Common_Consequences, Description, Diagram, Modes_of_Introduction, Other_Notes, Time_of_Introduction

Modification: CWE Content Team · MITRE · 2025-09-09 · CWE 4.18

updated Observed_Examples, References

Modification: CWE Content Team · MITRE · 2025-12-11 · CWE 4.19

updated Applicable_Platforms, Maintenance_Notes, Weakness_Ordinalities

Modification: CWE Content Team · MITRE · 2026-04-30 · CWE 4.20

updated Applicable_Platforms, Maintenance_Notes, Mapping_Notes, Other_Notes

Modification: CWE Content Team · MITRE · 2026-10-28 · CWE 5.0

updated Applicable_Platforms, Dimensions, References, Relationships, Taxonomy_Mappings

7197 vulnerabilities reference this CWE, most recent first.

GHSA-WWGH-7WM5-GX34

Vulnerability from github – Published: 2026-08-17 21:31 – Updated: 2026-08-17 21:31
VLAI
Details

An issue in ACME mini_httpd 1.30 and prior allows a remote attacker to cause a denial of service via the HTTP request header parser in the handle_request() function

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2026-68005"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2026-08-17T20:16:45Z",
    "severity": "HIGH"
  },
  "details": "An issue in ACME mini_httpd 1.30 and prior allows a remote attacker to cause a denial of service via the HTTP request header parser in the handle_request() function",
  "id": "GHSA-wwgh-7wm5-gx34",
  "modified": "2026-08-17T21:31:24Z",
  "published": "2026-08-17T21:31:24Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-68005"
    },
    {
      "type": "WEB",
      "url": "https://acme.com/software/mini_httpd"
    },
    {
      "type": "WEB",
      "url": "https://github.com/qop-qop-qop/qop-s-blog.github.io/blob/main/CVE-2026-68005/CVE-2026-68005.md"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-WWHC-9G9R-776M

Vulnerability from github – Published: 2025-04-15 21:31 – Updated: 2025-04-15 21:31
VLAI
Details

Vulnerability in the Oracle Application Object Library product of Oracle E-Business Suite (component: Core). Supported versions that are affected are 12.2.5-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Application Object Library. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Application Object Library. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2025-30730"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2025-04-15T21:16:02Z",
    "severity": "HIGH"
  },
  "details": "Vulnerability in the Oracle Application Object Library product of Oracle E-Business Suite (component: Core).  Supported versions that are affected are 12.2.5-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Application Object Library.  Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Application Object Library. CVSS 3.1 Base Score 7.5 (Availability impacts).  CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).",
  "id": "GHSA-wwhc-9g9r-776m",
  "modified": "2025-04-15T21:31:48Z",
  "published": "2025-04-15T21:31:48Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2025-30730"
    },
    {
      "type": "WEB",
      "url": "https://www.oracle.com/security-alerts/cpuapr2025.html"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-WWPC-M88M-FRJM

Vulnerability from github – Published: 2024-02-03 03:30 – Updated: 2025-11-04 00:30
VLAI
Details

IBM Security Access Manager Container (IBM Security Verify Access Appliance 10.0.0.0 through 10.0.6.1 and IBM Security Verify Access Docker 10.0.0.0 through 10.0.6.1) could allow an attacker to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 254651.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2023-30999"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2024-02-03T01:15:07Z",
    "severity": "HIGH"
  },
  "details": "IBM Security Access Manager Container (IBM Security Verify Access Appliance 10.0.0.0 through 10.0.6.1 and IBM Security Verify Access Docker 10.0.0.0 through 10.0.6.1) could allow an attacker to cause a denial of service due to uncontrolled resource consumption.  IBM X-Force ID:  254651.",
  "id": "GHSA-wwpc-m88m-frjm",
  "modified": "2025-11-04T00:30:44Z",
  "published": "2024-02-03T03:30:27Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2023-30999"
    },
    {
      "type": "WEB",
      "url": "https://exchange.xforce.ibmcloud.com/vulnerabilities/254651"
    },
    {
      "type": "WEB",
      "url": "https://www.ibm.com/support/pages/node/7106586"
    },
    {
      "type": "WEB",
      "url": "http://seclists.org/fulldisclosure/2024/Nov/0"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-WWR9-4GMR-XVQ9

Vulnerability from github – Published: 2025-03-20 12:32 – Updated: 2025-03-20 19:44
VLAI
Summary
H2O Vulnerable to Denial of Service (DoS) via `/3/Parse` Endpoint
Details

A vulnerability in the /3/Parse endpoint of h2oai/h2o-3 version 3.46.0.1 allows for a denial of service (DoS) attack. The endpoint uses a user-specified string to construct a regular expression, which is then applied to another user-specified string. By sending multiple simultaneous requests, an attacker can exhaust all available threads, leading to a complete denial of service.

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "PyPI",
        "name": "h2o"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "3.30.0.7"
            },
            {
              "last_affected": "3.46.0.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "Maven",
        "name": "ai.h2o:h2o-core"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "3.30.0.7"
            },
            {
              "last_affected": "3.46.0.1"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2024-10549"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-1333",
      "CWE-400"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2025-03-20T19:44:43Z",
    "nvd_published_at": "2025-03-20T10:15:17Z",
    "severity": "HIGH"
  },
  "details": "A vulnerability in the `/3/Parse` endpoint of h2oai/h2o-3 version 3.46.0.1 allows for a denial of service (DoS) attack. The endpoint uses a user-specified string to construct a regular expression, which is then applied to another user-specified string. By sending multiple simultaneous requests, an attacker can exhaust all available threads, leading to a complete denial of service.",
  "id": "GHSA-wwr9-4gmr-xvq9",
  "modified": "2025-03-20T19:44:43Z",
  "published": "2025-03-20T12:32:39Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2024-10549"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/h2oai/h2o-3"
    },
    {
      "type": "WEB",
      "url": "https://github.com/h2oai/h2o-3/blob/51c25940ded8b7d0acc8f3f72329fd9dedbb3a34/h2o-core/src/main/java/water/api/ParseHandler.java#L80"
    },
    {
      "type": "WEB",
      "url": "https://huntr.com/bounties/ce7bd2d6-fd38-440d-a91a-dd8f3fc06bc2"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "H2O Vulnerable to Denial of Service (DoS) via `/3/Parse` Endpoint"
}

GHSA-WWRH-GQQP-FJQ5

Vulnerability from github – Published: 2022-05-13 01:35 – Updated: 2022-05-13 01:35
VLAI
Details

A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2018-0230"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2018-04-19T20:29:00Z",
    "severity": "HIGH"
  },
  "details": "A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098.",
  "id": "GHSA-wwrh-gqqp-fjq5",
  "modified": "2022-05-13T01:35:33Z",
  "published": "2022-05-13T01:35:33Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2018-0230"
    },
    {
      "type": "WEB",
      "url": "https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20180418-fp2100"
    },
    {
      "type": "WEB",
      "url": "http://www.securityfocus.com/bid/103931"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-WWVM-FW3Q-QQF3

Vulnerability from github – Published: 2022-05-24 19:17 – Updated: 2022-06-29 00:00
VLAI
Details

SAP NetWeaver AS ABAP and ABAP Platform - versions 700, 701, 702, 730, 731, 740, 750, 751, 752, 753, 754, 755, 756, allows an attacker to prevent legitimate users from accessing a service, either by crashing or flooding the service.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2021-38181"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2021-10-12T15:15:00Z",
    "severity": "HIGH"
  },
  "details": "SAP NetWeaver AS ABAP and ABAP Platform - versions 700, 701, 702, 730, 731, 740, 750, 751, 752, 753, 754, 755, 756, allows an attacker to prevent legitimate users from accessing a service, either by crashing or flooding the service.",
  "id": "GHSA-wwvm-fw3q-qqf3",
  "modified": "2022-06-29T00:00:54Z",
  "published": "2022-05-24T19:17:18Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2021-38181"
    },
    {
      "type": "WEB",
      "url": "https://launchpad.support.sap.com/#/notes/3080710"
    },
    {
      "type": "WEB",
      "url": "https://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=587169983"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-WX3G-P9W5-PP6M

Vulnerability from github – Published: 2024-06-13 00:31 – Updated: 2024-06-13 00:31
VLAI
Details

An issue has been discovered in GitLab CE/EE affecting all versions starting from 8.4 prior to 16.10.7, starting from 16.11 prior to 16.11.4, and starting from 17.0 prior to 17.0.2. A vulnerability in GitLab's Asana integration allowed an attacker to potentially cause a regular expression denial of service by sending specially crafted requests.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2024-1963"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-1333",
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2024-06-12T23:15:49Z",
    "severity": "MODERATE"
  },
  "details": "An issue has been discovered in GitLab CE/EE affecting all versions starting from 8.4 prior to 16.10.7, starting from 16.11 prior to 16.11.4, and starting from 17.0 prior to 17.0.2. A vulnerability in GitLab\u0027s Asana integration allowed an attacker to potentially cause a regular expression denial of service by sending specially crafted requests.",
  "id": "GHSA-wx3g-p9w5-pp6m",
  "modified": "2024-06-13T00:31:23Z",
  "published": "2024-06-13T00:31:23Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2024-1963"
    },
    {
      "type": "WEB",
      "url": "https://hackerone.com/reports/2376482"
    },
    {
      "type": "WEB",
      "url": "https://about.gitlab.com/releases/2024/06/12/patch-release-gitlab-17-0-2-released/#redos-in-asana-integration-issue-mapping-when-webhook-is-called"
    },
    {
      "type": "WEB",
      "url": "https://gitlab.com/gitlab-org/gitlab/-/issues/443577"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-WX67-QW84-CM4G

Vulnerability from github – Published: 2026-07-24 21:12 – Updated: 2026-07-24 21:12
VLAI
Summary
react-server-dom: Denial of Service in Server Functions
Details

Impact

A denial of service vulnerability could be triggered by sending specially crafted HTTP requests to server function endpoints, this could lead to out-of-memory exceptions or excessive CPU usage.

We recommend updating immediately.

The vulnerability exists in versions 19.0.0 through 19.0.7, 19.1.0 through 19.1.8, and 19.2.0 through 19.2.7 of: - react-server-dom-webpack - react-server-dom-parcel - react-server-dom-turbopack

Patches

Fixes were back ported to versions 19.0.8, 19.1.9, and 19.2.8.

If you are using any of the above packages please upgrade to any of the fixed versions immediately.

If your app’s React code does not use a server, your app is not affected by this vulnerability. If your app does not use a framework, bundler, or bundler plugin that supports React Server Components, your app is not affected by this vulnerability.

Show details on source website

{
  "affected": [
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-webpack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.0.0"
            },
            {
              "fixed": "19.0.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-turbopack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.0.0"
            },
            {
              "fixed": "19.0.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-turbopack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.1.0"
            },
            {
              "fixed": "19.1.9"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-parcel"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.1.0"
            },
            {
              "fixed": "19.1.9"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-webpack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.1.0"
            },
            {
              "fixed": "19.1.9"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-turbopack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.2.0"
            },
            {
              "fixed": "19.2.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-parcel"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.2.0"
            },
            {
              "fixed": "19.2.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    },
    {
      "package": {
        "ecosystem": "npm",
        "name": "react-server-dom-webpack"
      },
      "ranges": [
        {
          "events": [
            {
              "introduced": "19.2.0"
            },
            {
              "fixed": "19.2.8"
            }
          ],
          "type": "ECOSYSTEM"
        }
      ]
    }
  ],
  "aliases": [
    "CVE-2026-44907"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400",
      "CWE-770"
    ],
    "github_reviewed": true,
    "github_reviewed_at": "2026-07-24T21:12:02Z",
    "nvd_published_at": "2026-07-21T17:17:08Z",
    "severity": "HIGH"
  },
  "details": "### Impact\n\nA denial of service vulnerability could be triggered by sending specially crafted HTTP requests to server function endpoints, this could lead to out-of-memory exceptions or excessive CPU usage.\n\nWe recommend updating immediately.\n\nThe vulnerability exists in versions 19.0.0 through 19.0.7, 19.1.0 through 19.1.8, and 19.2.0 through 19.2.7 of:\n- react-server-dom-webpack\n- react-server-dom-parcel\n- react-server-dom-turbopack\n\n### Patches\n\nFixes were back ported to versions 19.0.8, 19.1.9, and 19.2.8.\n\nIf you are using any of the above packages please upgrade to any of the fixed versions immediately.\n\nIf your app\u2019s React code does not use a server, your app is not affected by this vulnerability. If your app does not use a framework, bundler, or bundler plugin that supports React Server Components, your app is not affected by this vulnerability.",
  "id": "GHSA-wx67-qw84-cm4g",
  "modified": "2026-07-24T21:12:02Z",
  "published": "2026-07-24T21:12:02Z",
  "references": [
    {
      "type": "WEB",
      "url": "https://github.com/react/react/security/advisories/GHSA-wx67-qw84-cm4g"
    },
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2026-44907"
    },
    {
      "type": "PACKAGE",
      "url": "https://github.com/react/react"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ],
  "summary": "react-server-dom: Denial of Service in Server Functions"
}

GHSA-WX6W-7QW9-7QJ5

Vulnerability from github – Published: 2025-09-29 18:33 – Updated: 2025-10-28 21:30
VLAI
Details

AT_NA2000 from Nanda Automation Technology vendor has a denial-of-service vulnerability. For the processing of TCP RST packets, PLC AT_NA2000 has a wide acceptable range of sequence numbers. It does not require the sequence number to exactly match the next expected sequence value, just to be within the current receive window, which violates RFC5961. This flaw allows attackers to send multiple random TCP RST packets to hit the acceptable range of sequence numbers, thereby interrupting normal connections and causing a denial-of-service attack.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2025-56234"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2025-09-29T17:15:31Z",
    "severity": "HIGH"
  },
  "details": "AT_NA2000 from Nanda Automation Technology vendor has a denial-of-service vulnerability. For the processing of TCP RST packets, PLC AT_NA2000 has a wide acceptable range of sequence numbers. It does not require the sequence number to exactly match the next expected sequence value, just to be within the current receive window, which violates RFC5961. This flaw allows attackers to send multiple random TCP RST packets to hit the acceptable range of sequence numbers, thereby interrupting normal connections and causing a denial-of-service attack.",
  "id": "GHSA-wx6w-7qw9-7qj5",
  "modified": "2025-10-28T21:30:29Z",
  "published": "2025-09-29T18:33:13Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2025-56234"
    },
    {
      "type": "WEB",
      "url": "https://github.com/zq-star/TCP-Vuln-Report/blob/master/PLC/AT-NA2000/tcp-rst/at-na2000-tcp-rst.md"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

GHSA-WX77-P7QV-FM55

Vulnerability from github – Published: 2022-05-13 01:37 – Updated: 2022-05-13 01:37
VLAI
Details

A Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets.

Show details on source website

{
  "affected": [],
  "aliases": [
    "CVE-2017-14028"
  ],
  "database_specific": {
    "cwe_ids": [
      "CWE-400"
    ],
    "github_reviewed": false,
    "github_reviewed_at": null,
    "nvd_published_at": "2017-11-16T21:29:00Z",
    "severity": "HIGH"
  },
  "details": "A Resource Exhaustion issue was discovered in Moxa NPort 5110 Version 2.2, NPort 5110 Version 2.4, NPort 5110 Version 2.6, NPort 5110 Version 2.7, NPort 5130 Version 3.7 and prior, and NPort 5150 Version 3.7 and prior. An attacker may be able to exhaust memory resources by sending a large amount of TCP SYN packets.",
  "id": "GHSA-wx77-p7qv-fm55",
  "modified": "2022-05-13T01:37:39Z",
  "published": "2022-05-13T01:37:39Z",
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://nvd.nist.gov/vuln/detail/CVE-2017-14028"
    },
    {
      "type": "WEB",
      "url": "https://ics-cert.us-cert.gov/advisories/ICSA-17-320-01"
    },
    {
      "type": "WEB",
      "url": "http://www.securityfocus.com/bid/101885"
    }
  ],
  "schema_version": "1.4.0",
  "severity": [
    {
      "score": "CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H",
      "type": "CVSS_V3"
    }
  ]
}

Mitigation
Architecture and Design

Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.

Mitigation
Architecture and Design
  • Mitigation of resource exhaustion attacks requires that the target system either:
  • recognizes the attack and denies that user further access for a given amount of time, or
  • uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed.
  • The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question.
  • The second solution is simply difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply makes the attack require more resources on the part of the attacker.
Mitigation
Architecture and Design

Ensure that protocols have specific limits of scale placed on them.

Mitigation
Implementation

Ensure that all failures in resource allocation place the system into a safe posture.

CAPEC-147: XML Ping of the Death

An attacker initiates a resource depletion attack where a large number of small XML messages are delivered at a sufficiently rapid rate to cause a denial of service or crash of the target. Transactions such as repetitive SOAP transactions can deplete resources faster than a simple flooding attack because of the additional resources used by the SOAP protocol and the resources necessary to process SOAP messages. The transactions used are immaterial as long as they cause resource utilization on the target. In other words, this is a normal flooding attack augmented by using messages that will require extra processing on the target.

CAPEC-227: Sustained Client Engagement

An adversary attempts to deny legitimate users access to a resource by continually engaging a specific resource in an attempt to keep the resource tied up as long as possible. The adversary's primary goal is not to crash or flood the target, which would alert defenders; rather it is to repeatedly perform actions or abuse algorithmic flaws such that a given resource is tied up and not available to a legitimate user. By carefully crafting a requests that keep the resource engaged through what is seemingly benign requests, legitimate users are limited or completely denied access to the resource.

CAPEC-492: Regular Expression Exponential Blowup

An adversary may execute an attack on a program that uses a poor Regular Expression(Regex) implementation by choosing input that results in an extreme situation for the Regex. A typical extreme situation operates at exponential time compared to the input size. This is due to most implementations using a Nondeterministic Finite Automaton(NFA) state machine to be built by the Regex algorithm since NFA allows backtracking and thus more complex regular expressions.